25925f2680
qt: use the same date format in all managers
2025-09-15 00:06:30 +02:00
0daa6d6fb0
rsx: allow to toggle 3D modes dynamically
...
A new checkbox for 3D support needs to be enabled at boot though.
2025-09-14 14:08:22 +02:00
6106e8f79f
rsx: fix 3D aspect ratio
2025-09-12 21:18:13 +02:00
a2a3ce1d7a
cellMouse: Add debug overlay
2025-09-12 04:10:19 +02:00
c36d01b46b
Update curl to 8.16.0
2025-09-11 22:14:28 +02:00
b3d5493a6b
input: restore original defaults when changing pad handlers
...
This fixes the vibration threshold being 0 when going to DS3 and back.
Probably also fixes a lot of other tiny bugs.
2025-09-11 10:24:08 +02:00
735588aa1a
qt/input: add vibration threshold to pad settings dialog
2025-09-11 10:24:08 +02:00
0876a7d37e
input: Memorize original small motor value for display purposes
2025-09-11 10:24:08 +02:00
aca9d28a7a
input: simplify VibrateMotor constructor
2025-09-11 10:24:08 +02:00
6911d0b5e1
cellPad: Add DS3 motor speed threshold
...
Also add motor speeds to pad debug overlay
2025-09-11 10:24:08 +02:00
eb6d13a8c0
System: expose date format and time format as settings
2025-09-10 19:51:43 +02:00
09f8c6ddcd
Add selection on firmware libraries panel by double-clicking ( #17481 )
...
I minor, and last, follow up of #17459 and #17442 allowing to
check/uncheck an entry in the firmware libraries panel by
double-clicking.
For that panel, a solution based on single-clicking was preferrable but
it seems it was conflicting with the existing itemChanged (single click
was triggered twice so producing no state change).
IMO, better than nothing.
---------
Co-authored-by: Megamouse <studienricky89@googlemail.com >
2025-09-10 16:25:47 +02:00
f63bb4c7fb
input: fix sdl pad handler LED and rumble properties
2025-09-08 21:20:21 +02:00
28920f1781
Fix emulator crash when a pad gets disconnected (e.g. due to inactivity) ( #17478 )
2025-09-07 21:21:35 +02:00
e457dbdea3
Update opencv to 4.12.0
2025-09-07 17:32:25 +02:00
c76a3366ec
Network: Increase P2P listener thread rest duration ( #17474 )
...
1 milisecond is not enough time for WSAPoll to be CPU time efficient, 5 miliseconds seems to address it.
2025-09-07 13:03:36 +03:00
0564842871
SPU: Restore postponed LR notifications (with tweaks)
2025-09-06 00:05:46 +03:00
f84df03651
SPU: Limit SPU self notifying thread to 12+ threaded CPUs
2025-09-05 11:11:03 +03:00
fc62733d65
SPU: Self-notifying SPU waiters
2025-09-05 11:11:03 +03:00
cfe1eca185
SPU: Reimplement reservation notifications
2025-09-05 11:11:03 +03:00
34a9d03d3d
Update SDL to 3.2.22
2025-09-02 23:29:54 +02:00
79fa06f9d6
Update FAudio to 25.09
2025-09-02 23:29:54 +02:00
c7de9053b4
Qt: fix saved gs_frame visibility
2025-09-02 00:30:44 +02:00
6d1a85b947
Minor improvements and cleanup on VFS panel ( #17459 )
2025-09-01 20:44:00 +02:00
4800aa9bfc
Update Qt to 6.9.2
2025-08-29 21:17:30 +02:00
92a30b4e41
Fix raw mouse handler keypress logic
2025-08-27 20:50:38 +02:00
6b238d847f
Fix mvk formulae causing builds to fail
2025-08-25 19:21:56 +02:00
3a13da3201
asm.hpp: Make utils::rational_mul<u64>() consistent ( #17452 )
2025-08-24 19:12:35 +03:00
4332d2151e
vfs_dialog: ensure that one item is always selected
2025-08-24 10:26:46 +02:00
e56bc9d15f
vfs_dialog: allow to check list items with double-click
2025-08-24 10:26:46 +02:00
ce4edf9cb1
patch_manager: make patches selectable by double click
2025-08-24 10:26:46 +02:00
d72f95677e
overlays: add settings for screenshot and recording hints
2025-08-21 08:27:12 +02:00
d087c86243
Audio: simplify apply_volume
2025-08-20 20:36:29 +02:00
6e7c3362b3
SPU: Update RdEventStat Busy Wait detection to updated setting behavior
2025-08-20 06:36:11 +03:00
246519c5e1
Fixes for AppImage not targeting Gamemode ( #17398 )
...
Targets #17386
2025-08-18 00:03:31 +02:00
8e34d7885c
SPULLVMRecompiler: add overload for _ptr
2025-08-09 23:34:23 +03:00
1902c5f3f4
SPULLVMRecompiler: remove unused parameters from spu_ptr and _ptr
2025-08-09 23:34:23 +03:00
48d3b30204
llvm: use CreatePtrAdd
...
use CreatePtrAdd instead of CreateGEP(get_type<u8>(), ...) or
CreateIntToPtr(CreateAdd, CreatePtrToInt(...))
2025-08-09 09:41:07 +03:00
f474533447
Update SDL to 3.2.20
2025-08-06 22:28:06 +02:00
bf3501b737
Update 7zip to 25.01
2025-08-06 22:28:06 +02:00
cda683df63
Update FAudio to 25.08
2025-08-06 22:28:06 +02:00
e5537c1cb0
Remove alternative default device detection in Cubeb backend
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 21:00:57 +01:00
e49a086edf
Fix description of system wolfSSL option
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 19:56:01 +02:00
69bf745246
Add option to use system Vulkan Memory Allocator
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 19:56:01 +02:00
2211876b57
Add option to use system hidapi
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 19:56:01 +02:00
cb5411440d
Add option to use system zstd
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 19:56:01 +02:00
1b72868abf
Add option to use system glslang
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 19:56:01 +02:00
9126d617c5
Add option to use system RtMidi
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 19:56:01 +02:00
aa7758a20f
Add option to use system MiniUPnPc
...
Signed-off-by: Marcin Serwin <marcin@serwin.dev >
2025-08-04 19:56:01 +02:00
81b33625f9
Set USE_SYSTEM_OPENAL default to OFF on macOS and Windows
...
On Linux, using system libraries is generally preferred, but this is
less relevant on macOS and Windows. In particular, macOS does not
provide "alext.h" in its OpenAL framework, which causes the build to
fail.
2025-08-03 12:27:02 +02:00
Megamouse